Increase in turnover for mining equipment manufacturers
Positive business development outside Europe
Foreign business is the key reason behind the positive development. The expected increase in turnover is almost completely generated by business outside Europe. According to VDMA figures, exports to China increased by 55 % in the first 6 months, while exports to Russia rose by 54 %. In addition, business with Canada, parts of South America and Australia is going well. Exports to Canada in the first 6 months of 2018 were almost on par with the export figures of the entire previous year (26 million € compared to 29 million €). One half of the 45 % increase in South America can be attributed to exports to Argentina (14 million €), while mining equipment at a value of 23.5 million € was delivered to Australia.
In contrast, business in Europe is declining. Compared to the same period of the previous year, exports to EU-28 countries declined by approximately 40 % in the first half of 2018. “This decline can be attributed to last year‘s investments in major infrastructure projects, which had an influence on the previous year‘s figures,“ says Klaus Stöckmann, VDMA Mining. Business with the rest of Europe fared much better, with export figures increasing by nearly 7 %. Exports to the USA declined slightly (minus 4 %).
Domestic business is also experiencing a downturn, with turnover in the first 6 months dropping by 35 % compared to the same period of the previous year. VDMA Mining assumes that this decline can be attributed to the phasing out of coal mining and particularly the uncertainties concerning lignite. Capacity expansions are expected neither in the coal sector, nor in the potash and salt industry. The association expects similar or slightly declining turnover in the domestic market for
the future.
At the peak of the economic and financial crisis in 2012, the German mining technology sector was experiencing a strong economic tailwind. While virtually all other industrial sectors recorded heavy losses, the German mining equipment sector achieved an all-time record turnover of 6.2 billion €. One major reason were the long lead times, with one to two years passing between order receipt and delivery, and thus receipt of payment. Economic factors thus made their mark on manufacturers‘ balance sheets with a considerable delay. The impact of global developments was felt only one year later. Since then, turnover declined by more than 50 % to 2.7 billion € in the previous year.
However, this downturn now seems to have bottomed out. The significant increase in incoming orders of 17 % in the first months of 2018 is considered to be a clear sign of economic recovery in this sector, as is the increase in turnover of 10 % recorded in the same period.
Hardly any new mines
According to VDMA, the overall increase in demand is almost exclusively due to replacements and investments the global mining industry undertakes to optimize efficiency and costs, and to increase safety in the mines. “This is what drives our business,“ says Stöckmann. Exploration projects concerning new raw material deposits are few and far between at the moment. In fact, mine operators in some parts of the world are still devoting much of their time to reducing the excess capacities created prior to the economic and financial crisis.
VDMA is currently working on developing a technology roadmap for member companies to provide a guideline for the future. The roadmap is intended to provide comprehensive information on the technical challenges and requirements the sector will be facing in the next 10 to 15 years. “This is an ongoing process,“ says Stöckmann. “We are currently in the midst of discussions.“ In addition, the roadmap is intended to highlight potential areas of cooperation between member companies and universities. And the first step has already been taken. Together with RWTH Aachen University, VDMA is planning an event under the motto “High-performance mining” (//www.high-performance-mining.com" target="_blank" >www.high-performance-mining.com:www.high-performance-mining.com), which is to be held on December 4 and 5, 2018. This event is designed to assist mining equipment manufacturers in identifying and addressing market demands early on.
