Salter Cyclones Supplies Solids Separating Systems and Hydrocyclones Worldwide

Salter Cyclones has dispatched to the US two SMART systems to control the process in very flexible grinding circuits. The task for this type of circuit is to keep the solids separation system at peak efficiency across a wide range of process conditions and product requirements. Additionally, the system should not place constant demands on the plant personnel to make operational adjustments.
 
Salter Cyclones' solution is to install two of its systems, one for each of the two grinding circuits based on different mill sizes and incorporating the company's extended 10in hydrocyclones. These systems make the required adjustments automatically so that the target product specification is maintained. This is despite significant variations in requirements for product tonnage and despite having to accommodate varying recirculating load percentages.
 
A simple solution to material separation
A SC2009, nine-way 2in assembly with stand and launder has been supplied to a client producing calcium carbonate. The assembly offers a compact and lightweight solution to packaging a number of hydrocyclones within the smallest footprint. The 2in hydrocyclones are treating the output from a grinder to separate out the clay. The hydrocyclones' vortex finders are fitted with Salter Cyclones uniquely designed ceramic extensions, which reduce residue in the product.
 
Mineral test rigs supplied worldwide
Laboratory mineral separators have been supplied to Namibia, Russia and Canada for treating gold, copper and iron ore. A laboratory MGS has been supplied to a technical laboratory in Europe. Additionally, SCTR1 test rigs have been supplied to Australia, Singapore, Japan and the UK for a wide range of applications, including graphene production, slurry recycling and hematite separation.


www.saltercyclones.com
 
 

Related articles:

03/2010

Separation solutions for mineral slurries

Vibrating screening machines, hydrocyclones, decanter centrifuges or integrated separation plants – ITE GmbH develops comprehensive solutions for a wide range of industrial applications. Working in...

more
09/2014

New wear resistant hydrocyclones by CERA SYSTEM make this possible

The Thuringian ceramics specialist CERA SYSTEM Verschleißschutz GmbH now also develops hydrocyclones in mineral composite, aluminium oxide, silicon carbide and silicon nitride. The cyclones are...

more
07-08/2010

On trial

Systematic study of hydro vacuum cyclones

1 Starting Situation In tunnelling, the geology, advance rate and diameter of the boring machine dictate the requirements for the downstream separation plant. This is based on a modular design and...

more
11/2009

Optimized separation

Selected examples of the influence of cyclone underflow density to a closed circuit grinding system

1. Minimizing ultrafines in the hydrocyclone underflow The guideline to operate hydrocyclones at their lowest possible overflow density and their highest possible underflow density in closed circuit...

more
03/2013

High capacity

Improved grinding efficiency with the Derrick® Stack Sizer® Screen

1?Introduction Screening is the process of separating particles by size and fine screening typically refers to separations in the range of 10?mm (3/8?inch) to 38?µm (400?mesh). Fine screening, wet...

more