Tsurumi

Demo pump to steal the show

Tsurumi provides a real proof of performance at stand A6.338: the KRS2-80 pump on display has run for 20 000 hours without maintenance.

Tsurumi's slogan "Stronger for longer" seems appropriate: This KRS2-80 has run as a demonstrator for 21 years without any maintenance and will also be on display at bauma 2022
© Tsurumi

Tsurumi's slogan "Stronger for longer" seems appropriate: This KRS2-80 has run as a demonstrator for 21 years without any maintenance and will also be on display at bauma 2022
© Tsurumi
The manufacturer set this record quite incidentally. The pump is the company's own demonstrator for the series. It was put into service in 2001. It was only after 21 years that the first service was carried out – purely as a safety measure in the run-up to the trade fair, so that nothing would go wrong. Unfounded, as it turned out: Only a seal and small parts were replaced. The pump series is one of the most frequently built by the manufacturer and is designed for water containing mud or sand. It moves about 1700 l/min or pushes water up about 16 m. The water may contain stones with a diameter of up to 30 mm. The pump can be seen in a live wet operation at the stand.

And should it fail, Tsurumi will have a workbench on site as a novelty for visitors to the fair. Pump technicians will use it to demonstrate how to service a pump. Visitors are invited to join in.

And yes: Tsurumi will also be presenting innovations in 2022. Among other pumps, the company will showcase the KRDX. This is a completely new series of safety pumps that are approved according to IECEx and ATEX. The company will also be showing the digital Tsurumi Connect system for seamless monitoring of pumps and other machines, even those from other manufacturers. Operators can use it to determine the location of their machines, read out performance data or define alarm and failure scenarios. If water should leak somewhere, the new LSC2.75S can certainly help: This residual water pump even dries out puddles – proof will be provided at the stand.

Hall A6, stand 338

www.tsurumi.eu

Related articles:

2022-10 SPECIAL bauma 2022

Tsurumi (Europe) GmbH

Tsurumi will be lifting the veil on its new safety pumps at bauma 2022 and show visitors how to service a pump properly. For the first time, the exhibitor is coming to bauma with a workbench where...

more
2019-03 Tsurumi

Tsurumi

N?o two construction projects are the same, which also applies to the dewatering systems. Two new pumps by pump manufacturer Tsurumi offer greater scope to come up with ideal solutions. They will be...

more

Pump technology at its best

When it comes to dewatering, Tsurumi is the go to brand. At bauma in Hall 6, the pump manufacturer presented the new KRDX explosion proof dewatering pump and the new LSC2.75S residue pump. The company...

more
2010-09

TSURUMI (Europe) GmbH

For the first time Tsurumi will present their new cutting impeller pumps (Fig.) from the series C-CR at the IFAT ENTSORGA 2010. The new pumps are equipped with a two-pole instead of a four-pole motor....

more

Tsurumi at IFAT 2022: Waste water and dewatering

At IFAT 2022, pump manufacturer Tsurumi will be showing several new top class pumps for water related environmental tasks as well as for waste water treatment. The new LSC2.75S residue dewatering...

more