TAKRAF introduces its series of primary and secondary sizers

With hundreds of complete systems, as well as individual machines, having been supplied to clients all over the world, Tenova TAKRAF is a key supplier of equipment and systems for open pit mining and bulk handling. The international company offers innovative technological solutions as well as process and commodity knowledge along various industry value chains. Recently, TAKRAF’s product portfolio has been enhanced with the addition of sizer equipment, which now enables the company to integrate its own crushing machines into complete mining solutions for its clients.

TAKRAF offers standardized primary and secondary sizers for various crushing applications. The primary sizer product range covers inlet sizes from 2.5 m to 4.0 m with a throughput of up to 10 000 t/h; whereas the secondary sizer range covers inlet sizes from 2.0 m to 4.0 m with a throughput of up to 3500 t/h. Both sizer product ranges are suitable for the comminution of all material types, from standard to most challenging.

A key differentiating factor of TAKRAF’s sizers is the fact that special focus and attention was directed towards attributes such as ease of maintenance, reduced downtime and long equipment service life already during the sizer’s initial development. As a result, this sizers offer unparalleled levels of maintenance efficiency and service life. Some of the innovative solutions adopted include the quick and easy changing of crushing segments, as well as the use of advanced wear resistant materials such as hard-faced segments and tungsten picks. Other innovative solutions include an inching drive for roll maintenance, which increases safety significantly, a heavy duty drivetrain system; as well as adopting an efficient oil lubrication system with a view to greater environmental sustainability.

Mineral Laboratory supports sizer selection

Rock fragmentation and abrasion are critical elements with regards to material characterization. As a result, TAKRAF boasts in-house test facilities in Germany where it is able to conduct material tests across a wide variety of conditions. Determination of material crushability and wear behavior can thus be analyzed by specialized test machines, the results of which can then be employed to assist in sizer selection. Furthermore customized wear predictions of the crushing tools can also be determined.

Stand: C2.349

www.takraf.com

Related articles:

03/2013

HAZEMAG Group

At bauma 2013 HAZEMAG Group will present several exhibits. With the Secondary Impact Crusher HSI 1414 (Fig. 1) HAZEMAG combines two successful impact crusher-series to a single one and thus increases...

more

Multideck SIZERs for TATA steel mill, India

The company STC-Screening Technology Consulting located at Appen near Hamburg received an order from the plant construction firm Outotec GmbH covering two Multideck SIZERs of heavy design for...

more
03/2016

RollSizer DRS 660X3000 S – tailored to the coal industry

As one of the leading suppliers of crushing equipment for the minerals, mining and cement industry, the Industrial Solutions business area of thyssenkrupp will be presenting the RollSizer DRS 660X3000...

more
05/2013

Crushing plant for Dolomitt A/S

In March 2012 HAZEMAG Group received an order from Hammerfall Dolomitt A/S in Røsvik/Norway (Fig. 1), for the delivery and setting up of a processing plant with a feeding capacity of 600 t/h....

more
09/2012

More business for the El Nasr Phosphate Plant

Mogensen has received an order for a further ­Type S2056 Sizer from the El Nasr phosphate rock processing plant in Egypt. The new machine, scheduled to be delivered in early August, is to be used to...

more