Make use of resources3rd Nordhausen Secondary Raw Material Workshop, Nordhausen/Germany (21.–22.10.2010)

The event will be opened on 21.10.2010 with lectures on current developments in waste management, examples of material and energetic recycling as well as their energy ­efficiency. On 22.10.2010 some lectures will deal with the special problems of alternative fuel analytics. This year the special focus will be on the chlorine analytics and the ­determination of the share of biomass. Sampling as a basic prerequisite to get a representative analysis sample will be the subject of other lectures, in which automated solutions should be at the forefront of the discussion. Furthermore, a report will be given on the present state of the automation of the pressure drilling machine from Nordhausen. For further information please refer to Dr. rer. nat. Jürgen Poerschke, e-mail: poerschke@fh-nordhausen.de.

 

www.fh-nordhausen.de

x

Related articles:

Issue 2013-09

Nordhausen Secondary Resources Workshop

The 6th Nordhausen Secondary Resources Workshop (Fig.) will take place from 17. -18.10.2013. As in previous years, it will be opened on the first day of the event at Nordhausen’s long-established...

more
Issue 2012-09

Secondary Resources Workshop in Nordhausen

From 18.-19.10.2012, the Nordhausen Secondary Resources is being held for the fifth time. The event will be opened traditionally at the rooms of Nordhausen’s old-established brewery with a guest...

more
Issue 2014-05

Crushing concrete coarsely and fine

Concrete is a complex material, which its characteristics due to its composition and as a result of the systematic addition of additives can be adjusted very differentiated. However, this results in...

more
Issue 2010-12

Latest research findings

3rd Nordhausen Secondary Raw Materials Workshop, Nordhausen/Germany (21.–22.10.2010)

Over 50 experts and scientists from Germany and Austria met from 21.-22.10.2010 at the “3rd Nordhausen Secondary Raw Materials Workshop” to find out about the current status of research in the field...

more
Issue 2008-11/12

Pressing-Drill Method – A Representative Method for Taking Analysis Samples from Recycled Materials

1. Starting Situation Proper sampling and analytical evaluation of waste as heterogeneous as, for example, waste-derived fuels are a concern for both producers and recyclers. To ensure economic and...

more