IFAT 2020

For even more circular economy in the construction sector

Exhibition grounds
© Messe München

Exhibition grounds
© Messe München
Buildings and infrastructure are an important, man-made stockpile of raw materials. And – in line with climate and resource protection – this treasure needs to be uncovered and used. The environmental technology trade fair IFAT in Munich presents both challenges and opportunities arising on this path. A large exhibition sector will show the current technologies for even more circular economy in the construction sector.


Construction rubble, road construction waste, construction site waste as well as soil and stones are the largest waste fractions in Germany. They account for around 60 % of the total volume – more than 200 million tons of construction waste are generated annually. The construction boom, which has been continuing for several years now, “consumes” vast quantities of natural raw materials – and is causing the volume of construction waste to rise further due to increased demolition, dismantling and earthworks measures. At the same time, the possibilities for extracting gravel, sand and rocks are shrinking. And finally, conservation of resources and climate protection are high on the social and political agendas. “All these arguments speak for establishing a circular economy in the construction sector that is geared towards sustainability," emphasizes Stefan Schmidmeyer of the Minerals – Recycling and Recovery Association at the Federal Association for Secondary Raw Materials and Waste Management (bvse).


Demand for recycled building materials too low

The core element of such a circular economy is comprehensive, quality-assured recycling. In fact, most construction waste materials in Germany are already recycled with recycling rates of around 90 %. And according to bvse, recycling companies are working at full capacity. However, the sale of these secondary raw materials has proven to be problematic. “While the input volumes at the recycling plants are increasing, the demand for the building materials they produce remains at a low level,” regrets Schmidmeyer.


At the same time, bvse has observed that the disposal alternative – the filling or depositing of construction wastes – experiences substantial bottlenecks throughout the nation. Schmidmeyer: “It is not acceptable that potential raw materials have to be transported over long distances within Germany or partially even outside Germany to then bury them in landfills.”


In order to produce relief, suitable harmonized, legally binding framework conditions for the use of substitute building materials would have to be installed quickly. Pioneering buildings – especially from the public sector – could also further increase the acceptance of recycled materials. In the field of structural engineering, one of these role models is the environmental station of the city of Würzburg, which was inaugurated in May last year. It is the first building in Bavaria that is three-quarters recycled concrete.


Identifying and removing pollutants

Another task: for good marketability, secondary building materials must be free of pollutants, especially asbestos. “Meanwhile, we have the necessary examination methods to reliably determine asbestos in construction waste,” says Dipl.-Ing. Sandra Giern, Managing Director of the German General Association of Hazardous Material Remediation (GVSS). On the one hand, current guidelines of the Association of German Engineers (VDI) govern the investigation and assessment of asbestos in building structures. On the other hand, they define how even the smallest amounts of asbestos can be detected in rubble. “This creates the basis for identifying and removing contaminants from the economic cycle in a targeted manner already in advance of construction measures. And it is possible to introduce separation criteria for the asbestos content in recyclable construction waste," explains Sandra Giern.


Taking the entire life cycle into account

To further optimize the material cycles in the construction sector, the later usability of the materials used must be considered already during planning. There is still considerable potential thanks to digitalization, because it allows to take into account the entire life cycle of a building – from design and construction to demolition.


IFAT Pavilion and live demonstrations on construction waste

The sustainable handling of waste produced on construction sites has long been a topic at the environmental technology trade fair IFAT. This year, the top-class supporting program at the IFAT Pavilion will be complemented by various live demonstrations in the adjacent outdoor area. The entire building material cycle will be represented, from the detection of pollutants and selective dismantling to the recycling of building materials and the reuse in road and sewer construction.


For example, the Waste Treatment and Recycling Association at the German Engineering Federation (VDMA) organizes the “VDMA Crushing Zone.” At the last IFAT – and under a different name – this show concentrated on solutions for crushing and processing mineral waste. This year, it will additionally include a complex and realistic simulation of the technologies used for the previously required demolition. The general use of building materials is the subject of the demonstration “Sustainable construction of roads, traffic routes and sewers” by the German Association of the Building Industry, and Environmental and Mechanical Engineering (VDBUM).




Related articles:

Issue 06/2022 State-of-the-art C&D waste recycling technology

Rhomberg investment as a boost for Austrian circular economy

Rhomberg Bau, the construction and resources division of Independent Austrian firm Rhomberg Group, has announced a major new investment in state-of-the-art construction and demolition (C&D) waste...


IFAT Munich 2022: a strong restart for climate protection

Be it plastics, building materials or water: sustainable resource management solutions are essential for environmental and climate protection – and can be found at IFAT Munich. The World's Leading...


Insights into the circular economy

1 Introduction The circular economy is an alternative model to the linear economy and is sustainable. The model is quite simple in theory (Fig. 1), but difficult to put into actual practice. The...

Issue 07-08/2018

Symposium on circular economy

From September 18?–?19, 2018 a symposium entitled “Circular Driven Economy” will be held by the AF Groups, SINTEF, CDE and SHEEHAN in the Radisson Blu Edwardian Hotel in Heathrow. The EU...

Issue 11/2021 Holistic approach

Technology alone is not enough to achieve a circular economy

T?OMRA, one of the global leaders in sensor-based technologies has understood that technology alone is not enough to create a closed-loop circular economy. Making the shift from linear to circular to...