ELTRA

Combustion Analyzers for TOC Analysis of Solid Materials

The TOC (total organic carbon) content is an important parameter to characterize materials like soil, rocks or cement. It can be determined by controlled combustion at a fixed temperature, by application of a temperature ramp or by adding acid. ELTRA offers high-performance combustion analyzers for all these methods.

The CW-800 and CW-800M (Fig.) are suitable for the determination of both TOC and TIC (total inorganic carbon) content in one sample by application of different carrier gases and temperatures. The CW-800M is used for applications with temperature ramps.

Due to their robust construction the combustion analyzers CS‑800, CS-580 and CS-580A are suitable for measuring acidulated samples. They operate with gold cuvettes which replace the costly halogen traps. The use of sample loaders facilitates the handling of larger sample series.

www.eltra.com

x

Related articles:

Issue 2013-06

Precise element analysis

ELTRA’s ONH analyzers determine the oxygen, nitrogen and hydrogen content of inorganic sample materials using inert gas fusion in an impulse furnace with temperatures up to 3000?°C. The ONH series...

more

11.10.2013 / Eltra: Thermogravimetric Analysis of up to 19 Samples

ELTRA’s TGA Thermostep is a thermogravimetric analyzer which determines various parameters such as moisture, volatiles and ash content in one analysis. The user defines the temperature profiles and...

more
Issue 2018-03

Precise carbon / sulfur analysis with flexible measuring range

The new ELEMENTRAC CS-i was developed for accurate and reliable analysis of carbon and sulfur in inorganic materials like steel, cast iron, copper, ore, cement, ceramics, or glass. It uses an...

more

Cutting Power XL for High Sample Throughput

With the new SM 400 XL RETSCH have enhanced their cutting mill portfolio by a model for specific requirements. This mill is suitable for primary cutting of large sample pieces measuring up to 170 x...

more
Issue 2012-11

Cyclone mills – ideally suited for temperature-sensitive samples

For the grinding of solids the use of a cyclone can be beneficial, depending on the material properties. The rotation of the mill’s rotor or a connected vacuum cleaner produces a rotating air flow...

more