W‌hen a conveyor belt is stopped for maintenance, say in a coal mine, its own weight can create problems by distributing the tension unevenly. To ensure that a belt can be safely cut and securely spliced by service technicians, the forces in the area under repair should be spread over the whole width. For this purpose Flexco has developed the TUG HD belt clamp. It is suitable for a variety of materials and belt types – and meets rigorous industry standards.


TUG HD belt clamps are used to restrain or pull a conveyor belt and then hold it firmly in place. Maintenance work becomes much simpler and safer. The user simply slides the aluminium clamp bar into the clamp ends and tightens the ends against the belt with trapezoidal screws. When the repair is finished, the screws are slowly loosened. The TUG HD applies a strong force that is evenly distributed over the entire belt width. To rule out hazards, the aluminium bars have a non-slip grip pattern that faces the belt surface. The safety factors of clamp ratings meet or exceed industry safety standards, as verified by third-party tests.

The belt clamps can be used on a variety of conveyor belts – for example, PVC belts or solid woven belts. They can also be used on multiple conveyor belting types, including flat, sidewall, chevron, and other specialty profiles. Two versions are available. The version with a 6 tonne capacity rating is suitable for belt widths up to 1800 mm and belt thicknesses up to 50 mm. The version for 8 tonnes is designed for widths up to 2400 mm and thicknesses up to 55 mm. The TUG HD can be used in a dual clamp set-up at two belt sections.


Stand B2.251

//www.flexco.com" target="_blank" >www.flexco.com:www.flexco.com


Related articles:

Issue 03/2017

Maintain conveyor belts ergonomically

Flexco has developed an innovative device for the ergonomic maintenance of conveyor belts in coal mines, steelworks and wood-processing mills. The Flexlifter enables service personnel to hoist the...

Issue 06/2020 Belt conveyor danger zones

Recognizing the hazards is a key step toward preventing conveyor-related injuries

I?n bulk material handling applications, a conveyor is typically a massive, complex and extremely powerful system. It’s usually constructed of rubber belting, set on rolling idlers, wrapped around...

Issue 01-02/2022 From light to heavy – and cold to hot

SOLIDS 2022 trade fair – Flexco Europe to present solutions to increase productivity for conveyor belt systems

T???he SOLIDS trade fair, which will take place in Dortmund on June 22 and 23, is the most important trade fair for granulate, powder & bulk solids technologies – and Flexco Europe will also be...


Innovative solutions to increase the productivity of conveyor belt systems

The bauma trade fair for construction vehicles and construction & mining machinery will take place in Munich from October 24 to 30. In its booth, Flexco Europe will show how conveyor belt problems...

Issue 09/2016

Belt centring stations are effective even with damaged belts

Misalignment of the conveyor belt is a frequent cause of material loss in conveyor systems. Belt centring stations can detect this and correct it. The latest such system in Flexco’s product range is...