ALLU at CONEXPO/CONAGG 2020


© ALLU

© ALLU
ALLU will be exhibiting equipment from its Transformer, Processor and other equipment ranges at CONEXPO/CONAGG 2020. With a theme of “Transforming the way you work”, ALLU will show how its on transforming efficiency, transforming profitability, transforming green credentials are achieved through transforming equipment and operations.

 

As one of the world’s leading construction equipment exhibitions, ALLU will be using the show to exhibit leading members of its ranges, outline new features of the equipment, and launch its latest developments aimed at further enhancing customer business operations.

 

Transforming the way you work

At the heart of the ALLU offering is a business focus based on “Transforming the way you work”. This essentially translates into efficiency through the solution being a one-stop-shop process enabling the screening, crushing, aerating, mixing and loading all in a one-step operation. This also enables the transforming of profitability as less material goes to landfill resulting in less expenditure in haulage costs and landfill fees. The re-use of material on site also means that there no need to purchase virgin material due to the recycling and utilization of left over materials and the generation of an income from it.

 


© ALLU

© ALLU
Additionally, ALLU equipment is also focused on businesses transforming their green credentials, as less material transported to the jobsite means a reduction in fuel consumption, less material to landfill and the greater efficient utilization of waste materials leading to the support of sustainability. Vitally, this is accomplished as ALLU equipment helps transform any carrier - excavator, wheel loader, skid steer etc – into a multifunctional tool that will screen, crush, mix, aerate, pulverize and load all in a one-step operation.

 


© ALLU

© ALLU
In order to both show the breadth of the offering, and to show at first-hand how ALLU is able to help transform the way businesses work, the following equipment will be exhibited at the show:

·ALLU Transformer DL 2-09 with 8 mm TS blades (the thinnest blade model)

·ALLU Transformer DH 3-17 with 16/32 TS blades

·ALLU Transformer DH 4-17 with 25/50 TS blades

·ALLU Transformer M 3-20 with 50 mm TS blades

·ALLU Processor 300HD

 

The patented unique TS blade structure has been developed by ALLU which has long been a pioneer in developing techniques of this kind. The TS blades are a modern development for the screener / crusher market, with ALLU set to deliver new levels of efficiency and productivity with the new blade variations. This new blade structure also will further enable customers to utilize their ALLU Transformer in more than way.

 

The ALLU Processor is a power mixer attachment which converts any excavator into a powerful and versatile mixing tool capable of penetrating and effectively mixing a variety of difficult materials. Materials suited for the attachment range from clay, silt, peat, sludge and sediment, to dredged material and contaminated soil. Fitted to, and powered by the excavator’s hydraulic system, and benefitting from its ability to reach difficult or soft areas, the Processor 300 HD is able to mix materials everywhere the excavator goes. This means that binders or chemical agents can be delivered to the area of the highest mixing shear by an attached 80 mm diameter pipe, and injected via a nozzle located between the mixing drums.

 

The complete line-up for CONEXPO/CONAGG

The ALLU stand will be located C20326 Central Hall. The purpose designed stand will enable ALLU to show visitors how ALLU equipment and solutions are able to transform business operations, delivering improved productivity, efficiency and profitability.The ALLU equipment at the show will demonstrate that with the widest range of attachments on the market that the ALLU equipment ranges enables businesses to choose the right piece of equipment to meet their very particular requirements. ALLU looks forward to showing at first-hand how its equipment and expertise can help any business transform more than just its profits.

 

Stand C20326 Central Hall

www.allu.net


Related articles:

ALLU at CONEXPO/CONAGG 2017

The ALLU Group will be exhibiting at the CONEXPO/CONAGG exhibition in Las Vegas from 7th – 11th March. At the show the company will provide focus on the Transformer Series, showing how screening...

more

ALLU transforming at steinexpo 2017

ALLU Group will be exhibiting and demonstrating its new, customer focused technology brand: ALLU TRANSFORMER at steinexpo 2017. Alongside demonstrations of the TRANSFORMER series, ALLU will be...

more

New Allu Crusher and Transformer developments premiered at CONEXPO

Despite reduced attendance at this year’s show, the launch of the new heavy duty range of Allu crushing attachments and the latest Transformer developments saw Allu’s booth welcome many visitors at...

more

New Transforming products from ALLU at Intermat 2018

ALLU presented at Intermat 2018 leading members of its Transformer and Processor ranges, outlined the new features of the equipment, and launched its latest development aimed at further enhancing...

more
03/2018

ALLU: new transformer and processor ranges

A?LLU Group will be proudly exhibiting equipment from the Transformer and Processor ranges at Intermat 2018. Transforming your business The ALLU stand will be located in the inside earthmoving and...

more