Hardox against abrasion in all industries

The company Schulte GmbH & Co. KG in Warburg/ Germany has relied on the Hardox wear plates from SSAB for the last 20 years. Founded in 1924, the company is a leading provider of system and piece production in the fields of machinery and abrasion technology and has customers spread all over Germany and in the neighbouring countries of Austria, Belgium, France, the Netherlands and Luxembourg. The main target group of the company is machine manufacturers and wear parts dealers, as well as retail customers from all kinds of industries, such as the glass, aggregates, scrap recycling (Fig. 1) etc.


The company has a special interest in thick plates (Fig. 2) and works closely with SSAB to develop new products in this field. “Every now and then we require thicker plates in the Hardox 400 and 500 lines”, says CEO Josef Schulte. “Before we were forced to apply other steels, such as so-called case-hardening and heat treatable steels. These steels are relatively expensive and they often have to be additionally annealed. Now when SSAB brings thicker plates on the market, it is possible for us to implement more products with SSAB steel. Thus, we have a clear price advantage since the material costs are lower than that of tempering steels. Also, we save ourselves the steps of annealing the steel and in some cases hardening it mechanically. The SSAB steel that has already been annealed makes it possible for us to carry out the shortest possible delivery times.”

Schulte tested a plate of 90 mm and used it to manufacture teeth for Roller Breakers for the quarry industry. No cracks occurred during the flame cutting, which was a problem that had often been observed by steel of this thickness from other manufacturers. In these hardness tests the plate even exceeded the specified hardness values.


Schulte now offers all Hardox products, from 4 to 120 mm and with a hardness of 400 to 600 Brinell. The high strength of the Hardox plates provides great dimensional stability and thus reduces permanent deformations. This allows con­structions with thinner plates and therefore a greater ­work-load. Furthermore, the company has been impressed with the plate’s excellent welding, forming and processing properties, as well as its high overall cost efficiency thanks to a longer lifespan, lower maintenance costs and high availability.


SSAB, Stockholm (S),

Tel.: +46 84545-700, www.ssab.com


Related articles:

Smarter and lighter mining equipment with Hardox® wear plate

Using Hardox® wear plate and Strenx® performance steel from SSAB, Australian Taurus Mining Solutions has managed to lower the weight of its mining buckets, increasing the capacity of the buckets by...


Hardox® wear plate extends Industrias Baco’s tipper bodies’ lifespan by 30 %

As the first company in Argentina to use SSAB’s Hardox® 500 Tuf wear plate in tipper truck bodies, Industrias Baco has seen customer satisfaction surge. Product lifespan has been extended by about...

Issue 04 /2017

Introducing the new generation Hardox® wear plate

Hardox 500 Tuf delivers exceptional strength, hardness and toughness in one and the same wear plate. Hardox 500 Tuf combines the best properties from Hardox 450 and Hardox 500. The result is a wear...

Issue 03/2010

SSAB Swedish Steel AB

Hardox wear plate, Weldox high-strength structural steel plate Toolox pre-hardened tool and machine steel are available up to a plate thickness of 160 mm depending on hardness grade. For mobile...

Issue 11/12/2008 Aus der Industrie / From the Industry

Wear Specialist Relies on High-Tech

The Waldsassen-based company Bergauer Regenerierung GmbH is currently investing in an extension to its facilities and additional processing machinery. A new 630-t bending machine was put into...