Sustainable growth

Achieving a circular economy with sensor-based ore sorting technology

I‌n the face of Climate Change, the calls for a sustainable growth agenda are increasingly urgent. Last March the European Commission announced its Circular Economy Action Plan as one of the main blocks of the European Green Deal. This new EU action plan promotes the idea of a circular economy and fosters sustainable processes along the entire life cycle of products, aiming to ensure that the resources used remain in use for as long as possible. The plan focuses on the sectors that use most resources and where the potential for circularity is high, many of which rely on the mining industry for their raw materials.

Mining will play a vital role, as primary resources will continue to be needed due to the growing population and rising per capita consumption, and because it is impossible to close the loop. Primary resources are also used for modern applications in energy production and high-tech products. In addition, the sustainable development goals that the United Nations have set up for 2030 are driving the development of green technologies that require a variety of minerals. Mining companies will have to adapt as their customers shift to a circular economy approach, and they will have a key role to play in this transition.

Challenges and opportunities for mining companies

The development of a circular economy in mining presents both challenges and opportunities for mining companies. It has the potential to address the shortage of mineral resources, waste of resources and environmental pollution while generating economic benefits. The circular-economy approach prioritizes reusing materials over extracting new raw materials. However, the need for virgin materials remains, and wherever they are used, their footprint should be as small as possible.

Also, companies in all industries are under pressure to reduce their environmental impact. This will drive an increase in the demand for sustainably mined products, which poses a challenge for mining companies, but also opens new opportunities. In order to reduce the footprint of the products they offer, mining companies will need to find ways to maximize the efficiency of their operations to minimize the use of energy and other inputs, while reducing waste as much as possible.

Dr. Mathilde Robben, Key Account Manager at TOMRA Sorting Mining, commented: “Climate Change and the pursuit of sustainable energy are shaping the global economy of the future, driving the transition from a linear to a circular economy model. The mining industry is already adapting and shifting towards a Green Mining approach. As a large consumer of energy, water and chemicals, it is a prime example of a sector where much can be done to reduce the impact on the environment. However, it is vital that it achieves this move towards sustainable practices without losing sight of profitability. TOMRA’s advanced sensor-based sorting technologies address the main challenges the mining industry faces today, such as declining head-grades and increasingly difficult to access ore bodies, rising energy and labor costs, and increased environmental liability, while providing a highly cost-effective solution for mining operations to participate in the circular economy and make the most of the new opportunities it brings.”

The role of sensor-based sorting in the mining circular economy

By investing in new technologies such as TOMRA’s sensor-based sorting, mining companies can take new approaches to extract natural commodities in an energy-efficient and resource-conserving manner. Installing ore sorting machinery in the early stages of the process has the potential to increase productivity through greater efficiency, as Fred Earnest, President and CEO of  Vista Gold Corporation, has experienced with a TOMRA XRT sorter: “Because we’re processing less material, we’re now able to do a finer size. With finer grind our gold recovery has gone up. This has resulted in improvements of grade by 10 %; our feed grade to the mill has gone up from 0.84 g/t to now 0.91 g/t. We’ve been able to achieve all of this on a capital-neutral basis.”

Sensor-based sorting technology can also significantly increase efficiency in terms of the input resources, such as energy, water and process reagents per ton of product. This significantly reduces the environmental footprint of the operation. Also, in an environment where competition for resources with other stakeholders such as communities and agriculture is increasingly fierce, this can become a driver to obtain the social license to operate.

Grinding is the most energy-intensive part of the production process, and sensor-based sorting has been proven to reduce energy consumption by about half, with a consequent cut in CO2 emissions. It also results in a smaller footprint for the operation and reduces waste material.

TOMRA’s sensor-based ore sorting can contribute to circular economy practices at the mine site level through a proactive management of mining waste dumps and by extending the lifetime of their processing. This technology can recover valuable ore even from sub-economic deposits or dumps, turning marginal waste into value, adding to its significant impact on the sustainability and profitability of the mine.

This was the experience of Engineering and project management company P2E Consulting, which commissioned a TOMRA X-Ray Transmission sorter to replace an existing drum Dense Media Separation (DMS) plant at Eastern Chrome mines in South Africa: “The TOMRA XRT sorter is used to upgrade Under Value (UV) material with a head grade of 20 – 28 %, to produce a saleable product at a minimum grade of 38 % Cr2O3. It does this efficiently and at a low Cost of Production (COP), with achieving grades in excess of 40 % Cr2O3 and mass recoveries of 25 – 30 % from scalped waste resulting in Chrome-in-tails as low as 12 %. There was no water usage at all and we didn’t need to spend on expensive reagents, so that we are producing Small Lumpy product for approximately 50 % of the cost compared to a DMS plant.”

Mining companies are rethinking their operating and business models to address the challenges of Climate Change and to meet the demands of their customers as they shift to circular economy models. TOMRA’s sensor-based sorting technologies can help them participate in the circular economy with Green Mining practices and take full advantage of the opportunities it creates. Its solutions, which range from industrial mineral processes to sorting gemstones, ferrous and non-ferrous metals, other fuels and slag metal, are in operation across the world, each contributing to extending the lifetime of mining operations, increasing the value derived from deposit and productivity, and reducing the environmental footprint of mining companies and their customers.


Related articles:

TOMRA Mining holds second successful seminar on sensor-based sorting in Toronto

Experienced industry leaders joined TOMRA Mining’s experts as guest speakers in a seminar designed to provide a solid, pragmatic grounding on sensor-based sorting. The event highlighted the important...

Issue 2021-11 Holistic approach

Technology alone is not enough to achieve a circular economy

T?OMRA, one of the global leaders in sensor-based technologies has understood that technology alone is not enough to create a closed-loop circular economy. Making the shift from linear to circular to...


TOMRA celebrates 50th anniversary by announcing world without waste mission

TOMRA, the global provider of advanced collection and sorting systems, celebrates its 50th anniversary. Each of the group’s four divisions – Collection, Food, Recycling and Mining – marked the...

Issue 2023-04 Sustainable future

Mining: a vital link in the transition to a net-zero economy

Modern society is heavily reliant on metals and minerals and the demand is growing, driven by a combination of global trends. The rising urbanization and higher living standards are pushing up the...

Issue 2021-07-08

Change in management at TOMRA

N???orway-headquartered global sustainable technology company TOMRA Systems ASA has said current president and CEO, Stefan Ranstrand, will be replaced by Tove Andersen by November 1 this year at the...