Continuous filter bed cleaning with the Leiblein FlowSand filter

As an upwards flowing filter, Leiblein’s new FlowSand filter cannot only retain very fine particles from the feed medium on its sand filter, thanks to the simultaneous continuous filter bed cleaning, it doesn’t require any collection basins, rinsing pumps, buffer tanks or complex backwash technology.

Operating principle of continuous filtration

By means of pipes and distributors, the raw water flows into the sand filter bed of the spatial filter standing on a conical tip (Fig. 1). Depending on requirements, this structure is made of steel or concrete. In an upward flow, the water runs through the filter bed from bottom to top being filtrated by the downwards moving filter bed (in countercurrent flow). The filtered water exits the sand filter via an overflow edge to the filtrate outlet. Crucial for a filtering process based on a circulation concept, that is without special storage or cleaning modules, is that the contaminated sand is passed by means of an airlift pump into the upper calming unit. From there, the sand falls into the sand washer, where it is cleaned in a countercurrent flow by a partial flow of the filtrate. The cleaned sand falls back onto the surface of the filter bed via a sand distributor conus, which ensures an even distribution of the sand over the whole filter area. The filter medium practically renews itself each time.

The FlowSand filter for high efficiency

Besides the spectrum of continuous filtration with filter bed self-cleaning, other interesting performance features result for the user. For instance, the use of media with a high solids load is possible. Despite a high solids load, according to the manufacturer, a steady filtrate quality can be obtained. Both feeding by pumps and in free inflow increases adaptability to specific conditions. As the filter does not require any moving mechanical parts, this results in a long lifetime and high availability. On top of this come the simple assembly, the prospect of low energy costs to operate the Leiblein FlowSand filter. Users who want to filter suspensions (Fig. 2) also have the possibility to separate smaller particles or dissolved materials with the addition of flocculants. With the formation of a biofilm, other applications can be opened up.

//" target="_blank" >


Related articles:

Issue 09/2018

Improved dewatering of sludge with a Leiblein vacuum belt filter

F?or dewatering sludge, the vacuum belt filter,?VBF for short, from Leiblein, the filtration specialist based in Baden-Württemberg, enjoys high acceptance on the market. More and more companies –...

Issue 06/2017

Filter technology meets stone technology for optimized treatment of process water

Jogerst Steintechnologie works and shapes natural stone for a wide range of applications. Working stone is associated with a high input of process water. An effective and efficient treatment of the...

Issue 12/2018 Scraper belt eliminates need for sludge pump

Process water purification with the Leiblein scraper belt lamella separator with gravity sedimentation in the smallest of spaces

W?hen users address process water treatment, an important step in the production process of many industries, the mechanical process by means of a lamella separator from Leiblein, the filter specialist...

Issue 09/2021 Dynamic solution

Filtering pigments and fillers gently but thoroughly

C?alcium carbonate is one of the fundamentals of paper production. At the same time, it is one of the cornerstones of the chemical industry, as well as of the food industry. Concentrating and...

Issue 06/2020 ATEX approved

Filter specialist Leiblein with new dosing station for cellulose

P?owdered cellulose may only be introduced into liquid for the deposition of a filter bed for high filtering quality in compliance with all regulations for hazard prevention in order to avert possible...