Heavy-duty industrial vacuums

With the DS 9/D 9 series, Ruwac is adding heavy-duty machines to its range of industrial vacuums. These can be used for extracting, conveying and filling heavy bulk solids (Fig.). Irrespective of whether gravel, slag, chippings, cement or crushed stone have to be conveyed, the semi-mobile plants operate with such high power that they can efficiently vacuum and extract large quantities of bulk solids. With a vacuum to -700 mbar and maximum air rates of 1300 to 2000 m³/h, the heavy-duty vacuums take up the material through a suction tube with a diameter of 100 or 120 mm and collect it in a rugged preliminary separator, which, for example, can be moved with a forklift and emptied with a tipping device. Alternatively, the vacuums can be mounted onto a truck or trailer chassis. The power of the equipment can be adjusted so that they can be adapted to the respective application and extract the material from lower- or higher-lying areas such as bins or ships’ holds.


Related articles:

Issue 2017-07-08

Conveying and screening very hard, coarse-grained and abrasive bulk solids

Natural stone from demolition, ore, slag, coal and other mineral resources goes on a long processing journey ­before they go for further processing. Vibratory equipment is a tried and tested...

Issue 2014-09

Smooth and robust hoses for powder & bulk solids technologies

In its anniversary year, NORRES Schlauchtechnik offers a highlight for its customers and partners: 125 years of NORRES and 125 innovations. Numerous innovations in the product and service range have...

Issue 2012-07-08

More extract from solids

New process including equipment to increase the efficiency of the ­treatment of very fine solids in counterflow liquids

1?Introduction The continuous treatment of solids with liquids in counterflow in a vessel is a widespread field of process engineering. These are processes such as chemical reactions, the extraction...

Issue 2020-01-02

Bulk solids

Dear Readers, What opportunities do digital solutions offer for bulk solids technology? This question is the focus of SOLIDS, which together with RECYCLING-TECHNIK on June 24 and 25 in 4 halls of...

Issue 2010-04

“Bulk solids” promote knowledge

8th VDI Specialist Conference “Conveying and storage of bulk solids”, Fulda/Germany (6 May 2010)

8th VDI Specialist Conference “Conveying and storage of bulk solids”, Fulda/Germany (6 May 2010) The VDI expert forum issues an invitation to the 8th specialist conference “Conveying and storage...