Knowing how

D‌ear readers,

 

Measurements alone often do not provide a satisfactory answer to a problem as long as one does not know how and under which conditions the measurements were made and how the measured values were interpreted or converted. We can therefore only trust certain measurement results if we know under which conditions and with which technical specifications they were determined. This is also the case with level measurement. The article ” Radiometric measurements – accuracy, repeatability and errors” (from p. 36) deals exactly with these points in level measurement and explains how to obtain reliable results despite certain external influences.

Fine mineral powders often cannot be processed in their original form because handling them in technical processes is extremely difficult. One solution is to agglomerate the fine particles into pellets or granulates. This processing step is found, for example, in the fertilizer industry, in ore processing or in the processing of ashes. In the article “Built-up agglomeration When to use a mixer and when to use a disk pelletizer or pelletizing drum?” starting on page 48, the suitable preparation technology aspects are presented and discussed and the corresponding processes are examined in more detail.

Many other contributions on the topics of ore processing, dewatering & drying and crushing & wear protection offer you an insight into new products and present current projects.

I wish you an interesting time with this issue

x

Related articles:

Issue 2018-10

Will you be there?

Dear readers, It won‘t be long now before the SOLIDS, co-located with the RECYLING-TECHNIK, opens its doors at the Messe Dortmund. The previous issue already provided a little preview - and we...

more
Issue 2018-09

Research

Dear Readers, The Helmholtz-Institute Freiberg for Resource Technology (HIF) stands for the development of innovative technology with the aim of securing the supply of the German economy with...

more
Issue 2018-07-08

Raw material extraction

Dear Readers, There are approximately 3500 dams for processing residues in the mining industry worldwide – and the trend is rising due to the decreasing ore content in the mineral deposits. If...

more
Issue 2013-03

WÖHWA Waagenbau GmbH

The competitiveness of companies in the bulk solids industry is increasingly dependent on their careful use of energy. Cost pressure and legislation demand energy saving in all areas. In the costs for...

more
Issue 2020-06

New rubric – By the way...

A? new section on the last page of the magazine – and this issue already contains the first article in this new series. Here the readers of AT MINERAL PROCESSING have the opportunity to present their...

more