The Trakpactor 550SR horizontal shaft impactor is designed for processing primary and secondary materials, such as natural rock and construction-derived materials like asphalt, recycling and demolition waste. The Trakpactor 550SR features cutting-edge styling with GRP guards and comes with the Powerscreen Pulse Intelligence system as standard. The machine‘s robust impact chamber features a twin apron, 4 bar rotor design, with hydraulic release aprons, hydraulic setting adjustment, hydraulic crusher overload and is driven directly off the engine via clutch for optimum fuel economy. The product conveyor features a raise/lower facility to aid clearance of rebar in the event of a blockage. The plant has been designed with ease of maintenance in mind.
This compact jaw crusher is ideally suited for operators in the mining, quarrying and recycling industries, especially those working in tight locations where working space as well as transport space is restricted thanks to its small footprint. The Metrotrak has been redesigned with the operator in mind with ease of use, serviceability, maintenance and material flow to the fore. One of the most exciting features of the Metrotrak is the chamber unblock feature which, with the aid of a motor attached to the flywheel on the chamber, will ‘rock‘ the chamber back and forth until the blockage is cleared. This gives the Metrotrak the key advantage of a hydrostatic setup whilst retaining the fuel efficiency of direct drive. This Metrotrak is also fitted with Powerscreen Pulse which provides the owner and operator with valuable information about machine performance.
Chieftain 2200 3 Deck
Launched in 2016 the Chieftain 2200 3 deck has set a new standard in high intensity screening and has exceeded expectations with customers globally. Its two highly versatile, 22‘ x 5‘ three deck screenboxes provide a total screening area of 19.5 m2. This gives a high tonnage capacity, often exceeding 700 t/h, resulting in increased quality product and revenue. The machine also features a pending patent drive system which allows switching between 2 and 4 bearing with bolt-on parts. By splitting up into two individual boxes, the Chieftain 2200 3 deck is able to run aggressively without the constraints of a larger box. It can screen with a 20 % increase in G-force compared to other screens with the same surface area. The tumbling action between the screens helps to maximize efficiency of the screens and accuracy of the product, especially at the close size materials.