Maschinenfabrik Gustav Eirich GmbH & Co KG

For the production of sand-lime bricks used in supporting and non-supporting structures Eirich offers a complete range of products for the industry: ranging from stand-alone machines to preparation plants for sand-lime bricks with state-of-the-art process control and the service you would expect from a partner who has been meeting the industry‘s needs with innovative solutions. Eirich machinery offers the following advantages:

• Homogeneous distribution of all materials and uniform coating of lime on the sand

• Intensive wetting of the lime with water

• The full surface of the sand grains is activated to form calcium silicate

• Clay agglomerates, which inhibit the formation of high-density calcium silicate with fine pores, are broken down

• Lime agglomerates are reliably broken down

• Uniform brick structure when light aggregates or fly ash are mixed in

• No streaking when pigments are mixed in

• Low high-wear part count (only about 10 % of cost compared to ring trough mixers) 

Hall C1, Stand 425/530,


Related articles:

Issue 01-02/2019 New products

Recycling and design of waste-derived products in the construction and ceramics industry

1? Introduction With a total volume of around 202 mill. t annually, mineral construction waste and soils constitute the largest waste stream in Germany [1]. In the year 2012, for example, in Bavaria...

Issue 12/2021 Investment in quality and the environment

Saving resources and energy with a molding sand preparation system from EIRICH

T?he foundry industry has been hit hard by the COVID-19 crisis, with the economic impact of the pandemic being keenly felt here. In order to meet the challenges of the future and to remain successful...

Issue 01-02/2019 Functional coatings for granulates

Agricultural chemical manufacturers take advantage of the benefits of EIRICH technology

I?n recent years, many renowned fertilizer manufacturers have opted for EIRICH processing technology. The requirements being placed on products today are increasingly complex. In many cases functional...

Issue 03/2018

Moulding sand

Newbuild of a modern iron foundry in Turkey

Over the last few decades, Turkey has achieved very high economic growth, and when it comes to technical standards, is on an equal footing in many areas with suppliers from the western industrial...

Issue 11/2022 Recycling secondary resources

How suitable are secondary resources from the demolition and construction industry for the production of novel geopolymer construction materials?

1 Introduction and objectives In 2019, 222 678 new construction projects were approved in Germany alone [1]. For the erection of newbuilds on this scale, in line with requirements, correspondingly...