1 In stationary recycling operations, the preconditions for the use of a Kleemann crushing plant with E-DRIVE are often very favourable. An adequate power supply is often available, occasionally even from an in-company photovoltaic system
© Kleemann GmbH
E-DRIVE – emission-free thanks to electric drive
The E-DRIVE concept offers two options: Diesel fuel or all-electric. All-electric operation is environmentally friendly: there are no CO2 emissions on site. A precondition for this is a good power infrastructure, which is often available in quarries or in larger recycling yards. In the power supply is insufficient or there isn’t one available, a diesel-electric work option is available. For example, if the complete plant in the quarry is to be moved along the rock face. Power is then supplied from a long cable, which is often too complex or may not even be possible. In this case, power comes from the fuel-efficient diesel engine. The crusher and all conveyor belts are then still driven electrically by a generator. Depending on the local situation, the E-DRIVE concept offers high flexibility.
D-DRIVE – the direct and powerful solution
The diesel-directdrive D-DRIVE provides power directly from the engine to the crusher. In the last few years, it was possible to reduce consumption, for example, through the load-dependent fan drive of the new EVO2 Generation. With regard to the degree of efficiency, the diesel-directdrive has the edge and fuel consumption is significantly lower. Thanks to their compact size and well thought-out transport options, the machines can be positioned in any place on the work site. If continuous use of the all-electric drive is not possible, the D-DRIVE is the better, more sustainable choice – whenever flexibility is required. This is the case with demolition and processing work in urban areas, but also in road construction where the machines have to be moved along as construction progresses.
2 Demolition work in inner-city areas is always a challenge. In many cases, an adequate power infrastructure is not available
© Kleemann GmbH
H-DRIVE – for mobile screening plants
The screening plants from Kleemann use an effective diesel-hydraulic drive. In this case, hydraulic pumps operate all machine parts such as screen, belts and drive system. The power requirements of the screens are considerably lower than a crusher – fuel consumption during operation is therefore more favourable. The optionally available Start-Stop system can reduce consumption even more. With the configuration with Dual Power, Kleemann screening plants have an option for an all-electric power supply. If a mains connection is available, the plant operates on site free of emissions – for example, in ecologically sensitive areas with strict regulations.
Summary: Ecological drive –
a question of the overall concept
Many factors play a role in the area of sustainability. Energy required for production, transport, storage, sales and disposal are all incorporated in the ecological footprint of the production process. As far as CO2 emissions during operation are concerned, an all-electric plant is without doubt the best choice. In other cases, you have to weigh up whether supply via an external power source involving high equipment and material costs is more constructive at the end of the day than technology with lower fuel consumption. Ecology can also mean placing your trust in low material usage and high durability.